ToolList:Multiplaz
From Diyode Community Workshop
Revision as of 20:42, 26 June 2016 by Simon Clark (Talk | contribs)
Multiplaz Specs
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
- Douse in water for 5-10 seconds after use
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
Metal | 3mm or less | Mode I - 4 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |
Metal | 3mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Non-conductive, Non-Flammable | 10mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Metal | 6mm or less | Mode II - 6 | 190V - 200V | 1.1mm - 1.3mm | Welding Mask 5.5DIN |