ToolList:Multiplaz
From Diyode Community Workshop
Multiplaz Specs
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
- Douse in water for 5-10 seconds after use
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
| Material
|
Thickness
|
Setting
|
Voltage
|
Nozzle Diameter
|
Eye Protection
|
| Metal
|
3mm or less
|
Mode I - 4
|
210V - 220V
|
1.1mm - 1.3mm
|
Dark glasses
|
| Metal
|
3mm or less
|
Mode I - 6
|
220V - 230V
|
1.1mm - 1.3mm
|
Dark glasses
|
| Non-conductive, Non-Flammable
|
10mm or less
|
Mode I - 6
|
220V - 230V
|
1.1mm - 1.3mm
|
Dark glasses
|
| Metal
|
6mm or less
|
Mode II - 6
|
190V - 200V
|
1.1mm - 1.3mm
|
Welding Mask 5.5DIN
|
Welding
- 50% Distilled Water, 50% Ethyl Alcohol in the chamber
- Starting Free movement: 5-6mm
- Connect grounding clamp to front and filler rod holder to the back.
- Start in Mode I - 6
| Material
|
Setting
|
Voltage
|
Nozzle Diameter
|
Eye Protection
|
| Metal
|
Mode I
|
140V - 180V
|
2.2mm - 2.5mm
|
Welding Mask 5.5DIN
|
