Difference between revisions of "Projects:Plastics Recycling:Shredder"
From Diyode Community Workshop
Simon Clark (Talk | contribs) m |
Simon Clark (Talk | contribs) (→Hex bar) |
||
Line 8: | Line 8: | ||
* Ideal is to use Stainless steel 303 bar for axle to better stand up to Haitian environment. | * Ideal is to use Stainless steel 303 bar for axle to better stand up to Haitian environment. | ||
* Specs call for 27mm bar. This can easily be swapped for 1 1/16" hex bar (26.9875mm). 1 1/16" 303SS bar is hard to source. 1" or 1 1/8" is much more common, but would require an adjustment of the laser cut files. | * Specs call for 27mm bar. This can easily be swapped for 1 1/16" hex bar (26.9875mm). 1 1/16" 303SS bar is hard to source. 1" or 1 1/8" is much more common, but would require an adjustment of the laser cut files. | ||
+ | * Simon has adjusted the files for a 1" bar, and is sourcing that in stainless. | ||
=== Motor Considerations === | === Motor Considerations === |
Revision as of 21:36, 11 June 2016
Quotes for Laser cutting:
- http://chinalasercuttingservice.com USD$342 including shipping. (~CAN$440)
- Advanced MetalTech - Guelph - CAN$575 - all imperial sizes.
- Amber Steel - Kitchener - CAN$$1588 for 3 sets, HST Incl
Hex bar
- Ideal is to use Stainless steel 303 bar for axle to better stand up to Haitian environment.
- Specs call for 27mm bar. This can easily be swapped for 1 1/16" hex bar (26.9875mm). 1 1/16" 303SS bar is hard to source. 1" or 1 1/8" is much more common, but would require an adjustment of the laser cut files.
- Simon has adjusted the files for a 1" bar, and is sourcing that in stainless.
Motor Considerations
- 70RPM, 80-100 NM Torque.
- Interchangeable with extruder motor, ideally.
- Salvaged would be ideal. Old washing machine motor or drill press motor?