Difference between revisions of "Wishlist"
From Diyode Community Workshop
(→Diyode Wishlist) |
(→Diyode Wishlist) |
||
Line 8: | Line 8: | ||
* 1/4-20 nuts | * 1/4-20 nuts | ||
* Drill chuck and arbor for spindle – Again, lee valley. | * Drill chuck and arbor for spindle – Again, lee valley. | ||
+ | * 10-20 3/16" end mills. KBC again | ||
+ | * knee mill... http://www.kbctools.com/can/Navigation/NavPDF.cfm (BIG) | ||
+ | * 3/4" or 1" square steel tubing... Good for everything. | ||
== Old stuff from the old wiki == | == Old stuff from the old wiki == |
Revision as of 17:39, 22 January 2014
Contents
Diyode Wishlist
- 8KW Furnace - $3,490
- Machining Vise – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.
- Rotary table – top item
- Sine bar (may replace vise and sine bar with sine vise?) Same page as vise
- Flycutter holder – Lee valley should be able to order one in for under $20
- 1/4-20 threaded rod
- 1/4-20 nuts
- Drill chuck and arbor for spindle – Again, lee valley.
- 10-20 3/16" end mills. KBC again
- knee mill... http://www.kbctools.com/can/Navigation/NavPDF.cfm (BIG)
- 3/4" or 1" square steel tubing... Good for everything.
Old stuff from the old wiki
Big stuff
- desoldering oven (tony is building one)
- milling machine
- better thickness planer
- anvil ??
- laminator
- Newer hot-air rework station
Little stuff
- Lots of 2X4's
- replacement gloves for sandblasting cabinet
- sandblasting grit
- In box for snail mail
- “No Parking” signs
stuff we always need more of
- screws
- sandpaper
- glue
- varnish