Difference between revisions of "Wishlist"

From Diyode Community Workshop
Jump to: navigation, search
(Diyode Wishlist)
Line 1: Line 1:
 
== Diyode Wishlist ==
 
== Diyode Wishlist ==
* [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm 8KW Furnace]
+
* [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm 8KW Furnace] - $3,490
 
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=461 Machining Vise] – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.  
 
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=461 Machining Vise] – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.  
 
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=448 Rotary table – top item]
 
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=448 Rotary table – top item]

Revision as of 22:02, 21 January 2014

Diyode Wishlist

  • 8KW Furnace - $3,490
  • Machining Vise – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.
  • Rotary table – top item
  • Sine bar (may replace vise and sine bar with sine vise?) Same page as vise
  • Flycutter holder – Lee valley should be able to order one in for under $20
  • 1/4-20 tapped 1/2” square nuts – Home depot or hardware
  • 1/4-20 threaded rod
  • 1/4-20 nuts
  • Drill chuck and arbor for spindle – Again, lee valley.

Old stuff from the old wiki

Big stuff

  • desoldering oven (tony is building one)
  • milling machine
  • better thickness planer
  • anvil ??
  • laminator
  • Newer hot-air rework station

Little stuff

  • Lots of 2X4's
  • replacement gloves for sandblasting cabinet
  • sandblasting grit
  • In box for snail mail
  • “No Parking” signs

stuff we always need more of

  • screws
  • sandpaper
  • glue
  • varnish