ToolList:Multiplaz

From Diyode Community Workshop
Revision as of 20:42, 26 June 2016 by Simon Clark (Talk | contribs)

Jump to: navigation, search

Multiplaz Specs

  • Mode 1 means that the arc is between the anode and the housing of the tip
  • Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
  • IMPORTANT! Always fill torch immediately prior to use
  • 1 Minute Warm up time
  • Nozzle 1-3 mm from workpiece
  • Douse in water for 5-10 seconds after use

Cheatsheet

Cutting

  • Distilled Water in the chamber
  • Starting Free movement: 5-6mm
Material Thickness Setting Voltage Nozzle Diameter Eye Protection
Metal 3mm or less Mode I - 4 210V - 220V 1.1mm - 1.3mm Dark glasses
Metal 3mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Non-conductive, Non-Flammable 10mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Metal 6mm or less Mode II - 6 190V - 200V 1.1mm - 1.3mm Welding Mask 5.5DIN