Difference between revisions of "ToolList:Multiplaz"
From Diyode Community Workshop
Simon Clark (Talk | contribs) |
Simon Clark (Talk | contribs) |
||
| Line 16: | Line 16: | ||
* Starting Free movement: 5-6mm | * Starting Free movement: 5-6mm | ||
| − | {| class="wikitable" | + | {| class="wikitable" style="width:90%" |
| − | |Material | + | !|Material |
| − | |Thickness | + | !|Thickness |
| − | |Setting | + | !|Setting |
| − | |Voltage | + | !|Voltage |
| − | |Nozzle Diameter | + | !|Nozzle Diameter |
| − | |Eye Protection | + | !|Eye Protection |
|- | |- | ||
|Metal | |Metal | ||
| Line 29: | Line 29: | ||
| 210V - 220V | | 210V - 220V | ||
|1.1mm - 1.3mm | |1.1mm - 1.3mm | ||
| + | |Dark glasses | ||
| + | |- | ||
| + | |Metal | ||
| + | |3mm or less | ||
| + | |Mode I - 6 | ||
| + | | 220V - 230V | ||
| + | |1.1mm - 1.3mm | ||
| + | |Dark glasses | ||
| + | |- | ||
| + | |Non-conductive, Non-Flammable | ||
| + | |10mm or less | ||
| + | |Mode I - 6 | ||
| + | | 220V - 230V | ||
| + | |1.1mm - 1.3mm | ||
| + | |Dark glasses | ||
| + | |- | ||
| + | |Metal | ||
| + | |6mm or less | ||
| + | |Mode II - 6 | ||
| + | | 190V - 200V | ||
| + | |1.1mm - 1.3mm | ||
| + | |Welding Mask 5.5DIN | ||
| + | |} | ||
| + | |||
| + | === Welding === | ||
| + | * 50% Distilled Water, 50% Ethyl Alcohol in the chamber | ||
| + | * Starting Free movement: 5-6mm | ||
| + | * Connect grounding clamp to front and filler rod holder to the back. | ||
| + | |||
| + | {| class="wikitable" style="width:90%" | ||
| + | !|Material | ||
| + | !|Thickness | ||
| + | !|Setting | ||
| + | !|Voltage | ||
| + | !|Nozzle Diameter | ||
| + | !|Eye Protection | ||
| + | |- | ||
| + | |Metal | ||
| + | |3mm or less | ||
| + | |Mode I - 4 | ||
| + | | 140V - 180V | ||
| + | |2.2mm - 2.5mm | ||
|Dark glasses | |Dark glasses | ||
|- | |- | ||
Revision as of 21:38, 26 June 2016
Multiplaz Specs
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
- Douse in water for 5-10 seconds after use
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
| Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
|---|---|---|---|---|---|
| Metal | 3mm or less | Mode I - 4 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |
| Metal | 3mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
| Non-conductive, Non-Flammable | 10mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
| Metal | 6mm or less | Mode II - 6 | 190V - 200V | 1.1mm - 1.3mm | Welding Mask 5.5DIN |
Welding
- 50% Distilled Water, 50% Ethyl Alcohol in the chamber
- Starting Free movement: 5-6mm
- Connect grounding clamp to front and filler rod holder to the back.
| Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
|---|---|---|---|---|---|
| Metal | 3mm or less | Mode I - 4 | 140V - 180V | 2.2mm - 2.5mm | Dark glasses |
| Metal | 3mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
| Non-conductive, Non-Flammable | 10mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
| Metal | 6mm or less | Mode II - 6 | 190V - 200V | 1.1mm - 1.3mm | Welding Mask 5.5DIN |
