Difference between revisions of "ToolList:Multiplaz"
From Diyode Community Workshop
Simon Clark (Talk | contribs) (Created page with "== Multiplaz Specs == * [http://www.multiplaz.com Multiplaz Website] * Mode 1 means that the arc is between the anode and the housing of the tip * Mode 2 means that the arc is...") |
Simon Clark (Talk | contribs) |
||
Line 2: | Line 2: | ||
* [http://www.multiplaz.com Multiplaz Website] | * [http://www.multiplaz.com Multiplaz Website] | ||
* Mode 1 means that the arc is between the anode and the housing of the tip | * Mode 1 means that the arc is between the anode and the housing of the tip | ||
− | * Mode 2 means that the arc is between the anode and the material being welded and cut. | + | * Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip. |
− | + | * IMPORTANT! Always fill torch immediately prior to use | |
+ | * 1 Minute Warm up time | ||
+ | * Nozzle 1-3 mm from workpiece | ||
== Cheatsheet == | == Cheatsheet == | ||
=== Cutting === | === Cutting === | ||
− | * Water in the chamber | + | * Distilled Water in the chamber |
+ | * Starting Free movement: 5-6mm | ||
+ | |||
{| class="wikitable" | {| class="wikitable" | ||
|Material | |Material | ||
Line 13: | Line 17: | ||
|Setting | |Setting | ||
|Voltage | |Voltage | ||
+ | |Nozzle Diameter | ||
+ | |Eye Protection | ||
|- | |- | ||
|Metal | |Metal | ||
|3mm or less | |3mm or less | ||
|Mode 1 - 4-6 | |Mode 1 - 4-6 | ||
− | | | + | | 210V - 220V |
+ | |1.1mm - 1.3mm | ||
+ | |Dark glasses | ||
|} | |} |
Revision as of 20:14, 26 June 2016
Multiplaz Specs
- Multiplaz Website
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
Metal | 3mm or less | Mode 1 - 4-6 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |