Laser Cutter

From Diyode Community Workshop
Jump to: navigation, search

DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.

The mirrors are 25mm in diameter and the lens is 20mm in diameter.


A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter

Care and Feeding


Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.

Fun Stuff

Further Reading