Difference between revisions of "Wishlist"
From Diyode Community Workshop
(→Diyode Wishlist) |
|||
Line 1: | Line 1: | ||
== Diyode Wishlist == | == Diyode Wishlist == | ||
− | * [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm 8KW Furnace] | + | * [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm 8KW Furnace] - $3,490 |
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=461 Machining Vise] – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably. | * [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=461 Machining Vise] – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably. | ||
* [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=448 Rotary table – top item] | * [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=448 Rotary table – top item] |
Revision as of 22:02, 21 January 2014
Contents
Diyode Wishlist
- 8KW Furnace - $3,490
- Machining Vise – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.
- Rotary table – top item
- Sine bar (may replace vise and sine bar with sine vise?) Same page as vise
- Flycutter holder – Lee valley should be able to order one in for under $20
- 1/4-20 tapped 1/2” square nuts – Home depot or hardware
- 1/4-20 threaded rod
- 1/4-20 nuts
- Drill chuck and arbor for spindle – Again, lee valley.
Old stuff from the old wiki
Big stuff
- desoldering oven (tony is building one)
- milling machine
- better thickness planer
- anvil ??
- laminator
- Newer hot-air rework station
Little stuff
- Lots of 2X4's
- replacement gloves for sandblasting cabinet
- sandblasting grit
- In box for snail mail
- “No Parking” signs
stuff we always need more of
- screws
- sandpaper
- glue
- varnish