Difference between revisions of "Wishlist"
From Diyode Community Workshop
(Created page with "Diyode Wishlist [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm|8KW Furnace]") |
|||
Line 1: | Line 1: | ||
Diyode Wishlist | Diyode Wishlist | ||
− | [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm | + | [http://www.acrossinternational.com/8KW-Compact-Induction-Furnace-w-Graphite-Crucible-for-Melting-IH8M.htm 8KW Furnace] |
+ | |||
+ | [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=461 Machining Vise] – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably. | ||
+ | |||
+ | [http://www.kbctools.com/can/Navigation/NavPDF.cfm?PDFPage=448 Rotary table – top item] | ||
+ | |||
+ | -Sine bar (may replace vise and sine bar with sine vise?) Same page as vise | ||
+ | |||
+ | -Flycutter holder – Lee valley should be able to order one in for under $20 | ||
+ | |||
+ | -1/4-20 tapped 1/2” square nuts – Home depot or hardware | ||
+ | |||
+ | -1/4-20 threaded rod | ||
+ | |||
+ | -1/4-20 nuts | ||
+ | |||
+ | -Drill chuck and arbor for spindle – Again, lee valley. |
Revision as of 21:46, 17 January 2014
Diyode Wishlist
Machining Vise – KBC sells screwless vises and sine vises for under $100, 3” jaw width preferably.
-Sine bar (may replace vise and sine bar with sine vise?) Same page as vise
-Flycutter holder – Lee valley should be able to order one in for under $20
-1/4-20 tapped 1/2” square nuts – Home depot or hardware
-1/4-20 threaded rod
-1/4-20 nuts
-Drill chuck and arbor for spindle – Again, lee valley.