Difference between revisions of "ToolList:Multiplaz"
From Diyode Community Workshop
Simon Clark (Talk | contribs) |
Simon Clark (Talk | contribs) |
||
Line 1: | Line 1: | ||
== Multiplaz Specs == | == Multiplaz Specs == | ||
* [http://www.multiplaz.com Multiplaz Website] | * [http://www.multiplaz.com Multiplaz Website] | ||
+ | * [http://www.diyode.com/files/Multiplaz-3500_En_www_20140307.pdf Manual] | ||
+ | * [http:///www.diyode.com/files/Multiplaz3500.mp4 Video DVD rip] | ||
+ | |||
* Mode 1 means that the arc is between the anode and the housing of the tip | * Mode 1 means that the arc is between the anode and the housing of the tip | ||
* Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip. | * Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip. |
Revision as of 20:42, 26 June 2016
Multiplaz Specs
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
- Douse in water for 5-10 seconds after use
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
Metal | 3mm or less | Mode I - 4 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |
Metal | 3mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Non-conductive, Non-Flammable | 10mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Metal | 6mm or less | Mode II - 6 | 190V - 200V | 1.1mm - 1.3mm | Welding Mask 5.5DIN |