ToolList:Multiplaz
From Diyode Community Workshop
Revision as of 20:14, 26 June 2016 by Simon Clark (Talk | contribs)
Multiplaz Specs
- Multiplaz Website
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
Metal | 3mm or less | Mode 1 - 4-6 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |