Difference between revisions of "ToolList:Multiplaz"

From Diyode Community Workshop
Jump to: navigation, search
Line 1: Line 1:
 
== Multiplaz Specs ==
 
== Multiplaz Specs ==
 
* [http://www.multiplaz.com Multiplaz Website]
 
* [http://www.multiplaz.com Multiplaz Website]
 +
* [http://www.diyode.com/files/Multiplaz-3500_En_www_20140307.pdf Manual]
 +
* [http:///www.diyode.com/files/Multiplaz3500.mp4 Video DVD rip]
 +
 
* Mode 1 means that the arc is between the anode and the housing of the tip
 
* Mode 1 means that the arc is between the anode and the housing of the tip
 
* Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
 
* Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.

Revision as of 20:42, 26 June 2016

Multiplaz Specs

  • Mode 1 means that the arc is between the anode and the housing of the tip
  • Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
  • IMPORTANT! Always fill torch immediately prior to use
  • 1 Minute Warm up time
  • Nozzle 1-3 mm from workpiece
  • Douse in water for 5-10 seconds after use

Cheatsheet

Cutting

  • Distilled Water in the chamber
  • Starting Free movement: 5-6mm
Material Thickness Setting Voltage Nozzle Diameter Eye Protection
Metal 3mm or less Mode I - 4 210V - 220V 1.1mm - 1.3mm Dark glasses
Metal 3mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Non-conductive, Non-Flammable 10mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Metal 6mm or less Mode II - 6 190V - 200V 1.1mm - 1.3mm Welding Mask 5.5DIN