Difference between revisions of "ToolList:Multiplaz"
From Diyode Community Workshop
Simon Clark (Talk | contribs) |
Simon Clark (Talk | contribs) (→Welding) |
||
(One intermediate revision by one user not shown) | |||
Line 16: | Line 16: | ||
* Starting Free movement: 5-6mm | * Starting Free movement: 5-6mm | ||
− | {| class="wikitable" | + | {| class="wikitable" style="width:90%" |
− | |Material | + | !|Material |
− | |Thickness | + | !|Thickness |
− | |Setting | + | !|Setting |
− | |Voltage | + | !|Voltage |
− | |Nozzle Diameter | + | !|Nozzle Diameter |
− | |Eye Protection | + | !|Eye Protection |
|- | |- | ||
|Metal | |Metal | ||
Line 50: | Line 50: | ||
| 190V - 200V | | 190V - 200V | ||
|1.1mm - 1.3mm | |1.1mm - 1.3mm | ||
+ | |Welding Mask 5.5DIN | ||
+ | |} | ||
+ | |||
+ | === Welding === | ||
+ | * 50% Distilled Water, 50% Ethyl Alcohol in the chamber | ||
+ | * Starting Free movement: 5-6mm | ||
+ | * Connect grounding clamp to front and filler rod holder to the back. | ||
+ | * Start in Mode I - 6 | ||
+ | |||
+ | {| class="wikitable" style="width:90%" | ||
+ | !|Material | ||
+ | !|Setting | ||
+ | !|Voltage | ||
+ | !|Nozzle Diameter | ||
+ | !|Eye Protection | ||
+ | |- | ||
+ | |Metal | ||
+ | |Mode I | ||
+ | | 140V - 180V | ||
+ | |2.2mm - 2.5mm | ||
|Welding Mask 5.5DIN | |Welding Mask 5.5DIN | ||
|} | |} |
Latest revision as of 22:11, 26 June 2016
Multiplaz Specs
- Mode 1 means that the arc is between the anode and the housing of the tip
- Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
- IMPORTANT! Always fill torch immediately prior to use
- 1 Minute Warm up time
- Nozzle 1-3 mm from workpiece
- Douse in water for 5-10 seconds after use
Cheatsheet
Cutting
- Distilled Water in the chamber
- Starting Free movement: 5-6mm
Material | Thickness | Setting | Voltage | Nozzle Diameter | Eye Protection |
---|---|---|---|---|---|
Metal | 3mm or less | Mode I - 4 | 210V - 220V | 1.1mm - 1.3mm | Dark glasses |
Metal | 3mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Non-conductive, Non-Flammable | 10mm or less | Mode I - 6 | 220V - 230V | 1.1mm - 1.3mm | Dark glasses |
Metal | 6mm or less | Mode II - 6 | 190V - 200V | 1.1mm - 1.3mm | Welding Mask 5.5DIN |
Welding
- 50% Distilled Water, 50% Ethyl Alcohol in the chamber
- Starting Free movement: 5-6mm
- Connect grounding clamp to front and filler rod holder to the back.
- Start in Mode I - 6
Material | Setting | Voltage | Nozzle Diameter | Eye Protection |
---|---|---|---|---|
Metal | Mode I | 140V - 180V | 2.2mm - 2.5mm | Welding Mask 5.5DIN |