Difference between revisions of "ToolList:Multiplaz"

From Diyode Community Workshop
Jump to: navigation, search
(Welding)
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
 
== Multiplaz Specs ==
 
== Multiplaz Specs ==
 
* [http://www.multiplaz.com Multiplaz Website]
 
* [http://www.multiplaz.com Multiplaz Website]
 +
* [http://www.diyode.com/files/Multiplaz-3500_En_www_20140307.pdf Manual]
 +
* [http:///www.diyode.com/files/Multiplaz3500.mp4 Video DVD rip]
 +
 
* Mode 1 means that the arc is between the anode and the housing of the tip
 
* Mode 1 means that the arc is between the anode and the housing of the tip
 
* Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
 
* Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
Line 13: Line 16:
 
* Starting Free movement: 5-6mm
 
* Starting Free movement: 5-6mm
  
{| class="wikitable"
+
{| class="wikitable"  style="width:90%"
|Material
+
!|Material
|Thickness
+
!|Thickness
|Setting
+
!|Setting
|Voltage
+
!|Voltage
|Nozzle Diameter
+
!|Nozzle Diameter
|Eye Protection
+
!|Eye Protection
 
|-
 
|-
 
|Metal
 
|Metal
Line 47: Line 50:
 
| 190V - 200V
 
| 190V - 200V
 
|1.1mm - 1.3mm
 
|1.1mm - 1.3mm
 +
|Welding Mask 5.5DIN
 +
|}
 +
 +
=== Welding ===
 +
* 50% Distilled Water, 50% Ethyl Alcohol in the chamber
 +
* Starting Free movement: 5-6mm
 +
* Connect grounding clamp to front and filler rod holder to the back.
 +
* Start in Mode I - 6
 +
 +
{| class="wikitable"  style="width:90%"
 +
!|Material
 +
!|Setting
 +
!|Voltage
 +
!|Nozzle Diameter
 +
!|Eye Protection
 +
|-
 +
|Metal
 +
|Mode I
 +
| 140V - 180V
 +
|2.2mm - 2.5mm
 
|Welding Mask 5.5DIN
 
|Welding Mask 5.5DIN
 
|}
 
|}

Latest revision as of 22:11, 26 June 2016

Multiplaz Specs

  • Mode 1 means that the arc is between the anode and the housing of the tip
  • Mode 2 means that the arc is between the anode and the material being welded and cut. Grounding Clamp must be used. No contact with workpiece. Install Protective tip.
  • IMPORTANT! Always fill torch immediately prior to use
  • 1 Minute Warm up time
  • Nozzle 1-3 mm from workpiece
  • Douse in water for 5-10 seconds after use

Cheatsheet

Cutting

  • Distilled Water in the chamber
  • Starting Free movement: 5-6mm
Material Thickness Setting Voltage Nozzle Diameter Eye Protection
Metal 3mm or less Mode I - 4 210V - 220V 1.1mm - 1.3mm Dark glasses
Metal 3mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Non-conductive, Non-Flammable 10mm or less Mode I - 6 220V - 230V 1.1mm - 1.3mm Dark glasses
Metal 6mm or less Mode II - 6 190V - 200V 1.1mm - 1.3mm Welding Mask 5.5DIN

Welding

  • 50% Distilled Water, 50% Ethyl Alcohol in the chamber
  • Starting Free movement: 5-6mm
  • Connect grounding clamp to front and filler rod holder to the back.
  • Start in Mode I - 6
Material Setting Voltage Nozzle Diameter Eye Protection
Metal Mode I 140V - 180V 2.2mm - 2.5mm Welding Mask 5.5DIN