Laser Cutter

From Diyode Community Workshop
Revision as of 16:31, 23 January 2014 by Zander (Talk | contribs)

Jump to: navigation, search

DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.

The mirrors are 25mm in diameter and the lens is 20mm in diameter.


  • Laser Cutter Usage Agreement
  • Laser Cutter Training Curriculum
  • Laser Cutter Certification

A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter

Care and Feeding


Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information. Further Reading

Focus on the surface, under the surface, or on the bottom surface.