Laser Cutter

From Diyode Community Workshop
Revision as of 09:19, 31 August 2015 by Simon Clark (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.

The mirrors are 25mm in diameter and the lens is 20mm in diameter.

Operation

A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter

Care and Feeding

Safety

Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.

Fun Stuff

Further Reading