Difference between revisions of "Laser Cutter"
From Diyode Community Workshop
Line 12: | Line 12: | ||
A very good place to start is KwartzLab's Wiki on their laser : [http://www.kwartzlab.ca/wiki/Laser_Cutter Laser Cutter] | A very good place to start is KwartzLab's Wiki on their laser : [http://www.kwartzlab.ca/wiki/Laser_Cutter Laser Cutter] | ||
− | * [http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial] | + | * [ http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial ] |
+ | * [ https://www.youtube.com/channel/UCYlpF5Vm0Tm-JiFrk7Uck2g Misc LaserCut stuff ] | ||
== Care and Feeding == | == Care and Feeding == | ||
Line 27: | Line 28: | ||
Please visit [http://www.z136.org/ ANSI Z136 Safe Use of Lasers] and [http://www.laserinstitute.org/PDF/Z136_1_s.pdf Copy of ANSI Z136.1] for general laser safety information. | Please visit [http://www.z136.org/ ANSI Z136 Safe Use of Lasers] and [http://www.laserinstitute.org/PDF/Z136_1_s.pdf Copy of ANSI Z136.1] for general laser safety information. | ||
+ | == Fun Stuff == | ||
+ | |||
+ | * [ https://www.youtube.com/watch?v=H2ULldN28V8 Prepare image to laser engraving with photoshop ] | ||
+ | * [ | ||
== Further Reading == | == Further Reading == | ||
* [http://www.thefabricator.com/article/lasercutting/the-importance-of-focal-positions-in-laser-cutting Focus on the surface, under the surface, or on the bottom surface.] | * [http://www.thefabricator.com/article/lasercutting/the-importance-of-focal-positions-in-laser-cutting Focus on the surface, under the surface, or on the bottom surface.] |
Revision as of 17:07, 20 February 2015
DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.
The mirrors are 25mm in diameter and the lens is 20mm in diameter.
Operation
A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter
- [ http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial ]
- [ https://www.youtube.com/channel/UCYlpF5Vm0Tm-JiFrk7Uck2g Misc LaserCut stuff ]
Care and Feeding
Safety
Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.
Fun Stuff
- [ https://www.youtube.com/watch?v=H2ULldN28V8 Prepare image to laser engraving with photoshop ]
- [