Difference between revisions of "Laser Cutter"
From Diyode Community Workshop
Line 11: | Line 11: | ||
A very good place to start is KwartzLab's Wiki on their laser : [http://www.kwartzlab.ca/wiki/Laser_Cutter Laser Cutter] | A very good place to start is KwartzLab's Wiki on their laser : [http://www.kwartzlab.ca/wiki/Laser_Cutter Laser Cutter] | ||
+ | |||
+ | * [http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial] | ||
+ | |||
== Care and Feeding == | == Care and Feeding == | ||
Revision as of 17:01, 20 February 2015
DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.
The mirrors are 25mm in diameter and the lens is 20mm in diameter.
Operation
A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter
Care and Feeding
Safety
Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.