Difference between revisions of "Laser Cutter"

From Diyode Community Workshop
Jump to: navigation, search
Line 16: Line 16:
 
* [[Laser_Cutter:Maintenance|Laser Cutter Maintenance]]
 
* [[Laser_Cutter:Maintenance|Laser Cutter Maintenance]]
 
* [http://diylaser.blogspot.ca/2012/01/get-your-co2-laser-mirrors-for-free.html Make your own mirrors]  
 
* [http://diylaser.blogspot.ca/2012/01/get-your-co2-laser-mirrors-for-free.html Make your own mirrors]  
 +
* [https://wiki.nottinghack.org.uk/wiki/Laser_cutter/LaserCut/Install Laser Cut Software]
  
 
== Safety ==
 
== Safety ==

Revision as of 15:50, 20 February 2015

DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.

The mirrors are 25mm in diameter and the lens is 20mm in diameter.

Operation

A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter

Care and Feeding

Safety

Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.

Further Reading