Difference between revisions of "Laser Cutter"
From Diyode Community Workshop
Line 16: | Line 16: | ||
* [[Laser_Cutter:Maintenance|Laser Cutter Maintenance]] | * [[Laser_Cutter:Maintenance|Laser Cutter Maintenance]] | ||
* [http://diylaser.blogspot.ca/2012/01/get-your-co2-laser-mirrors-for-free.html Make your own mirrors] | * [http://diylaser.blogspot.ca/2012/01/get-your-co2-laser-mirrors-for-free.html Make your own mirrors] | ||
+ | * [https://wiki.nottinghack.org.uk/wiki/Laser_cutter/LaserCut/Install Laser Cut Software] | ||
== Safety == | == Safety == |
Revision as of 16:50, 20 February 2015
DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.
The mirrors are 25mm in diameter and the lens is 20mm in diameter.
Operation
A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter
Care and Feeding
Safety
Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.