Difference between revisions of "Laser Cutter"
From Diyode Community Workshop
Simon Clark (Talk | contribs) (→Operation) |
|||
| Line 14: | Line 14: | ||
* [http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial] | * [http://www.transonturkiye.com/tutorials.html LaserCut 5.3 Software Tutorial] | ||
* [https://www.youtube.com/channel/UCYlpF5Vm0Tm-JiFrk7Uck2g Misc LaserCut stuff] | * [https://www.youtube.com/channel/UCYlpF5Vm0Tm-JiFrk7Uck2g Misc LaserCut stuff] | ||
| + | * [[Laser_Cutter:LVL3Notes|Some notes LVL3 has about a similar laser cutter]] | ||
== Care and Feeding == | == Care and Feeding == | ||
Latest revision as of 09:19, 31 August 2015
DIYode has a G.Weike model LG900 laser engraver. The laser is a 60Watt CO2 tube with 3 mirror flying optics setup and a 56mm final lens focal length.
The mirrors are 25mm in diameter and the lens is 20mm in diameter.
Operation
A very good place to start is KwartzLab's Wiki on their laser : Laser Cutter
Care and Feeding
Safety
Please visit ANSI Z136 Safe Use of Lasers and Copy of ANSI Z136.1 for general laser safety information.
